User's Guide

2. Ideal Location and Connection
Express5800/R110d-1E, E110d-1 User’s Guide
105
Chapter 2 Preparations
(3) Removing rail assemblies
If multiple rail assemblies are installed, it might be impossible to push the unlock lever. If this happens,
remove the rail assemblies from the rack by using the following procedure.
1. Refer to Chapter 2 (2.1.2) - (2) Removal procedure to remove the server from the rack.
2. Prepare the designated tool to remove
slide rail (outer rail) that comes with the
server.
3. Insert the tool into the square hall at the
front of a rail assembly as described in
the image on the right.
4. Unlock the rail assembly by pressing the
tool in the direction as shown in the
image below on the right.
Front view
Top view
Spring of the lock
Square hall