User Guide

BMC Configuration User's Guide
47
4.4.2 Battery Controller Information
This screen displays the various information of the battery controller.
Item Description
Battery Controller Information Displays the information of the Battery Controller.
Manufacturer Name The manufacturer name of the battery controller is displayed.
Device Name The device name of the battery controller is displayed.
Firmware Revision The firmware revision of the battery controller is displayed.
Supported Battery Type The type of the battery controller is displayed.
Approximate Backup Time at
Full Charge(current load)
The approximate backup time[minutes:seconds] in fully charged
state at current load of the battery controller is displayed. *1 *2
Approximate Backup Time at
Full Charge(maximum load)
The approximate backup time[minutes:seconds] in fully charged
state at maximum load of the battery controller is displayed. *1 *2
Rated Capacity The rated capacity[mAh] of the battery controller is displayed.
Rated Capacity
: The minimum capacity of the battery controller based on the
charge and discharge conditions of JIS C8708 2007.
Rated Power The rated power[W] of the battery is displayed.
Peak VA The peak power[W] of the battery is displayed.
Charged Power The power[W] required for charging is displayed.
*1: If the approximate backup time is unknown, "-" is displayed.
*2 'Approximate Backup Time at Full Charge' is a reference value when the server's environment
temperature is 25 degrees Celsius. This value may be different from actual operating time caused by
temperature differences.