Reference Guide

77
2.4.7 getBladeAutoSetting
Syntax:
dscli getBladeAutoSetting ChassisName SlotNumber
Description:
This command is effective only to the chassis that can install the EM card.
Display information to perform configuration of BMC of a CPU blade and component registration
automatically when NEC ESMPRO Manager detects new CPU blade installed on the chassis.
See 2.4.6 setBladeAutoSetting for each information details.
Options:
ChassisName
Specify the chassis name.
SlotNumber
Specify the slot number of CPU blade.
Output:
The following shows an example.
RECONFIGURE_BMC:Disable
REWRITE_IP_ADDRESS:Diasable
DHCP:Enable
ALERT_RECEIVER_IP_ADDRESS:192.168.14.18