Installation Guide

3. Setting Up Windows Server 2008 R2

Express5800/R120d-1E, R120d-2E Installation Guide (Windows)

Chapter 1 Installing Windows

30. If you used EXPRESSBUILDER DVD, remove it and then insert the OS installation media.

Tips

If you have not replaced the OS installation media after loading the driver, the

following message may appear.

If it appears, replace the OS installation media, and then click [Refresh].

31. When the following window appears, select the disk in which the partition will be created, and then click

Drive options (advanced).

If a partition has already been created, go to step 34.

32. Click [New], enter the partition size into the size input box, and then click [Apply].

Note

When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition size can

only be set to 2,097,152 MB or less.

Tips

When creating a new partition and installing the OS, a 100 MB boot partition is

created. When the following window appears, click [OK].

33. Select the partition created in step 32, and then click [Format].