Installation Guide

3. Setting Up Windows Server 2008 R2
Express5800/R120d-1E, R120d-2E Installation Guide (Windows)
38
Chapter 1 Installing Windows
10-3 Application settings
Set up applications using the Application settings wizard in the Parameter Setup Menu.
(1) Click [Setting] in Application settings.
(2) Confirm settings on the dialog shown below, change them as needed, and click [Finish].
11. Save parameters on Parameter Setup Menu as needed.
Click [Save], and save the parameter file according to displayed instructions.
If you do not need to save parameters, go to Step 12.
12. Click [Next] on Parameter Setup Menu.