Installation Guide

5. Setting Up Windows Server 2003 R2 x64 Edition
Express5800/R120d-1E, R120d-2E Installation Guide (Windows)
159
Chapter 1 Installing Windows
5.
Setting Up Windows Server 2003 R2 x64 Edition
Set up Windows Server 2003 R2 x64 Edition.
5.1
Before Starting Setup
Read through the cautions explained here before starting setup.
: Confirm during Setup with EXPRESSBUILDER
: Confirm during Setup with OS standard installer
(1/3)
Setup Items to confirm
The following editions of the Windows Server 2003 family may be installed.
 Windows Server 2003 R2 Standard x64 Edition
 Windows Server 2003 R2 Enterprise x64 Edition
Inquiries about installing other editions may be made at your sales dealer or
maintenance service company. When applying Service Pack 1, refer to the
following About Windows Server 2008 R2 and Windows 7 Service Pack 1:
Note
Setup with EXPRESSBUILDER cannot be used.

Windows
family
If Windows Server 2003 R2 x64 Edition is installed from Backup CD-ROM, the
license is already activated. If Windows Server 2003 R2 x64 Edition is installed
from an OS CD instead of Backup CD-ROM, a product key is required for license
authentication. At this time, the product key must be the same as that indicated on
the COA label of Windows Server 2003 R2 x64 Edition.
For details, refer to Chapter 1 (5.6 License Authentication).
Important
 Activate within 30 days following installation. The system is locked if 30
days have passed without activation.

License
authentication
The following hardware configurations require special procedures.
 When using the OEM drivers, be sure to change the boot order of the Flash FDD
on the BIOS settings as follows:
Select Boot, Floppy Drive BBS priorities, Boot Option #1, and then specify
the Flash FDD used.
Note
Change as instructed in Chapter 1 (5.2.3 Setup procedure).

Hardware
configuration