User Guide

- 67-
Status LED state acquisition
Enter the following command at the command prompt:
lampstate -statuslamp
One of the following responses is returned according to the STATUS LED state.
off
STATUS LED is turned off.
green on
STATUS LED lights in green.
green blink
STATUS LED is blinking in green.
amber on
STATUS LED lights in amber.
amber blink
STATUS LED is blinking in amber.
red on
STATUS LED lights in red.
red blink
STATUS LED is blinking in red.
The state of the STATUS LED and the meaning are different according
to the system. Refer to the User’s Guide of the system for details.
UID LED State acquisition
Enter the following command at the command prompt:
lampstate -uidlamp
One of the following responses is returned according to actual display state of the UID LED.
off
UID LED is turned off.
on
UID LED is turned on (lights).
blink
UID LED is blinking (flashing).
If the UID LED is not mounted into the host system, the “UID LED
State acquisition” function works only to the virtual UID LED of the
Server Panel. Please refer to the User’s Guide of your host system for
the description of the UID LED.