User Guide

- 28-
Set the behavior when the SEL repository is full, the access log setting, AC-LINK setting,
PEF setting, management setting from the management software, and the automatic
video recording setting.
6 ECO
Power consumption and the throttling situation are displayed and the power capping can
be set.
7 System BIOS
Some functions of System BIOS can be set.
8 Battery Controller
If the host system is equipped with a battery, various functions of Battery Controller can
be set.
9 Backup/Restore
Backup and Restore each item that was set.
Notice
The strings “InternalUseOnly”, “MWA”, “AccessByEM-Poem”,
“Administrator” are reserved by BMC. Please do not add or remove
these characters as User Name. The user account is synchronized
with the IPMI user account. If you want to add or remove users in the
IPMI command tool, you can use User ID from 6 to 16.
For each BMC setting, the “Default” value of the setting from Web browser of BMC, Server
Configuration Utility, NEC ESMPRO Manager and the initial value of BMC Initialization are as
the following table (There are some items of Server Configuration Utility, NEC ESMPRO
Manager that are not displayed in the Menu.). “No change” in “BMC Initialization” means that
the setting values from the Web Browser/Server Configuration Utility/NEC ESMPRO
manager are preserved by executing BMC Initialization.
Menu Setting
Web Browser
Server
Configuration
Utility
NEC ESMPRO
Manager
“Default” value
BMC Initialization
Network
Management LAN
Management LAN
Management LAN
Connection Type
Auto Negotiation
Auto Negotiation
DHCP
Disable
Disable
IP address
192.168.1.1
192.168.1.1
Subnet Mask
255.255.255.0
255.255.255.0
Default Gateway
0.0.0.0
0.0.0.0
DNS Server
0.0.0.0
0.0.0.0
Host Name
Blank
"BMC" + MAC