User Guide

5.2.5 Update modules not supporting automatic update

Procedures for applying update packages not supporting automatic update are as below.

1. Copy the update package to be applied as an update package archive on your client PC.

2. Pick up the update package from an update package archive and apply it.

How to apply the update package is described in the readme file included in the update package.

5.2.5.1 For the specified component and module

'dump' command at the below target enables you to copy update packages related to specified component and

module.

 /cmps/<Component Name>/map/expup/modules/unsupportedmods/<Module Name>/uppkgs

Table 5-23 Properties of '/cmps/<Component Name>/map/expup/modules/unsupportedmods/<

Module Name>/uppkgs'

Property Access Description

EntryCount read Displays a number of modules managed by

ExpressUpdate.

Progress read If creating an update package archive is in

execution, its progress is displayed.

Table 5-24 Specific command of '/cmps/<Component Name>/map/expup/modules/unsupporte

dmods/<Module Name>/uppkgs'

Command Description

dump Archives update packages related to the specified module into an update package

archive.

stop Cancels creating an update package archive if it is in execution.

Table 5-25 Specific options of 'dump /cmps/<Component Name>/map/expup/modules/unsupp

ortedmods/<Module Name>/uppkgs'

Option Description

-destination <path> Specifies the path to the directory or zip file where the update package archive to

be copy.

-f | -force If an existing file path is specified, remove it and create new file.

Example

`dump /cmps/<Component Name>/map/expup/modules/unsupportedmods/<Module Name>` command

enables you to archive update packages into an update package archive. If starting command succeeds,

update packages to be archived are listed.

-> dump –destination C:¥temp /cmps/<Component Name>/map/expup/modules/unsupportedmods/<Module

Name>/uppkgs

COMMAND COMPLETED

"3.0"

"4.0"

"5.0"

The process to save update packages was started. To confirm its progress, execute 'show' command on update

packages element and refer to Progress property.

C:¥temp¥UpdatePackageArchive_20120701.zip