User's Guide

E-12 Installing Windows Server 2008
11.
The folder reference dialog box appears.
Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK].
 If the N8103-129/130 RAID Controller is used:
– Windows Server 2008 32-bit (x86) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008\fd1\megasas2
– Windows Server 2008 64-bit (x64) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008x64\fd1\megasas2
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 12.
 If the N8103-129/130 RAID Controller is used:
[LSI MegaRAID SAS 9264-8i]
12. Remove the NEC EXPRESSBUILDER DVD and set Backup DVD-ROM or Windows
Server 2008 DVD-ROM.
13. Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT: If the partition has already been created, go to
step 16.
14. Click [New], enter a partition size, and then click [Apply].
15. Select the partition created in step 14, and then click [Format].
16. Select the partition created, and then click [Next].