User's Guide

9-78 Upgrading Your Server

16. Attach the removed components.

IMPORTANT:

If an N8151-81-internal MO (USB) or N8151-86-internal RDX (USB)

is connected, the boot order might be changed.

On the [Boot] menu of the BIOS setup utility, make the boot priority of

the above removable devices lower than the boot disk.

Procedure:

[Boot] → [Boot Option #2] → [(Bus 08 Dev 0 0) PCI RAID Adapter]

17. Install the device driver for the connected backup device.

For details, see the instruction manual that came with your backup device.

Removal

To remove a component, perform the steps for attaching it in reverse.

BACKUP FANS

By inserting optional fans into the expansion fan slots, you can ensure that the system is cooled

even if the main fans fail.

The following figure shows the standard fan slots, optional fan slots, and the slot numbers assigned

to each slot.

Front

Back

Optional

Standard

FAN 1F

FAN 3F

FAN 4F

FAN 1R

FAN 2R

FAN 3R

FAN 4R