User's Guide

9-74 Upgrading Your Server

11. Connect the interface cable and power cable to the backup device.

Connect the power cable that came with the server and the separately sold SCSI cable

(K410-147 (00)) to the backup device.

NOTE: A power cable is provided for the device bay.

12. Insert the device carrier into the backup device bay.

The power cable is not yet connected. Only insert the carrier part way into the server, not

all the way in.

13. Connect the power cable that is connected to the backup device to the backplane.

14. Insert the device carrier into the backup device bay.

Push the carrier in until you hear a click indicating that the carrier is locked into place.

NOTE: Be careful not to get the cables wedged into anything while

pushing the carrier in.

15. Connect an optional SCSI controller to the PCI riser card.

For details, see PCI cards (on page 9-51).

16. Connect the SCSI cable to the SCSI controller connector.

17. Attach the PCI riser card.

Terminator

SCSI cable

C power cable