User's Guide

Troubleshooting 8-17
Displayed Error Message Description Recommended Action
C111 BMC SDR Repository
failure.
Failure of the SROM for storing
sensor data record information
C112 BMC SEL device failure. BMC device (chip) failure
C113 BMC RAM test error. BMC RAM error
C114 BMC Fatal hardware error. BMC error
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
C115
Management controller not
responding
BMC error
Upload the RMC
firmware. If this does
not resolve the
problem, contact your
service representative.
C116
Private I2C bus not
responding.
Private I2C bus not responding
C117 BMC internal exception BMC error
C118 BMC A/D timeout error. BMC error
C119 SDR repository corrupt.
BMC error or SDR data
corruption
C11A SEL corrupt.
BMC error or system event log
data corruption
C200
The error occurred during
memory configuration
check.
The memory information could
not be obtained.
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
C201 Memory Configuration
change is detected.
The memory configuration has
changed since the previous
startup.
This message appears
if the configuration was
changed since the
previous startup. If this
message appears even
no configuration
change has been
made, contact your
service representative.
C202 The error occurred
during CPU configuration
check.
The CPU information could not
be obtained.
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
C203 CPU Configuration
change is detected.
The CPU configuration has
changed since the previous
startup.
This message appears
if the configuration was
changed since the
previous startup. If this
message appears even
no configuration
change has been
made, contact your
service representative.