User's Guide

4-14 Configuring Your Server
PCI Configuration submenu
When [PCI Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
Disables / Enables the
onboard LAN controller.
Save & Exit
F1: General Help
F4: Save ESC: Exit
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 1.24.1115n Copyright (C) 2010 American Megatrends, Inc.
Security Server BootMain
LAN Controller
LAN1 Option ROM Scan
LAN2 Option ROM Scan
PCI Slot 0A Option ROM
PCI Slot 1B Option ROM
PCI Slot 1C Option ROM
[Enabled]
[PXE Boot]
[PXE Boot]
[Enabled]
[Enabled]
[Enabled]
Advanced
For details about the options, see the following table.
Option Parameters Description
LAN Controller Disabled
[Enabled]
Specify whether to enable or disable the onboard LAN
Controller.
LAN1 Option ROM
Scan
Disabled
[PXE Boot]
iSCSI Boot
Specify the boot method for LAN1, which is onboard.
LAN2 Option ROM
Scan
Disabled
[PXE Boot]
iSCSI Boot
Specify the boot method for LAN2, which is onboard.
PCI Slot 0A Option
ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a RAID controller installed in a slot dedicated to RAID
controllers.
PCI Slot 2B/3B
Option ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a PCI card connected to the full-height riser card.
PCI Slot 1C-3C
Option ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a PCI card connected to the low-profile riser card.
[ ]: Factory-set
IMPORTANT: For a RAID controller, LAN card (network boot), or
Fibre Channel controller, if no hard disk drive on which an OS is
installed is connected, set the option ROM for that slot to [Disabled].