Configuration Guide
Table Of Contents
- Technical Specification
- External Views
- Configuration Diagram
- Server Configuration
- 1 Base Models
- 2 2nd Processor
- 3 Memory
- 4 Internal Hard Disk Drives
- 4.1 RAID Configuration
- 4.2 Internal Drive Configuration
- 4.2.1 2.5-inch Drives with On-board SATA Controller
- 4.2.2 Up to eight 2.5-inch Drives with RAID 0/1 Controller with 256 MB Cache
- 4.2.3 Up to eight 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache
- 4.2.4 Up to eight 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache
- 4.2.5 Up to twelve 2.5-inch Drives with RAID 0/1 Controller with 256 MB Cache
- 4.2.6 Up to twelve 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache
- 4.2.7 Up to twelve 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache
- 4.2.8 3.5-inch Drives with On-board SATA Controller
- 4.2.9 3.5-inch Drives with RAID 0/1 Controller with 256 MB Cache
- 4.2.10 3.5-inch Drives with RAID 5/6 Controller with 256 MB Cache
- 4.2.11 3.5-inch Drives with RAID 5/6 Controller with 512 MB Cache
- 5 Optical Drive
- 6 Floppy Drive / Flash FDD
- 7 Internal Tape / RDX Drives
- 8 PCI Riser Card / PCI Card
- 9 Other Add-in Components
- 10 Add-on Components
- 11 Support Service
- References
- Revision History
CONFIGURATION GUIDE – NEC EXPRESS5800/R120b-2
NEC Corporation Revision 5.2, September 2011 35
References
Server Management
The EXPRESSSCOPE Engine 2, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
With Remote KVM
and Media License
kit
Hardware
monitoring
Temperature/voltage/power/
fan /degeneration (memory/hard drive)
Hardware event log collection
Boot monitoring
Booting, BIOS/POST stall, OS stall,
shutdown
1
1
Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)
Remote KVM
POST/BIOS setup, DOS utility
2
(via LAN)
Panic screen, Boot screen
2
Text-based screen (OS console)
2
GUI-based screen (OS console)
-
Remote control
Remote reset/power on-off/ dump
(via LAN)
OS shutdown
1
1
Remote media (CD/DVD/FD)
-
Server Management Command Line
Protocol (DMTF compliant)
Remote control via Web browser
(without dedicated app)
Remote batch
1
1
Scheduling (without UPS)
Others
Set automatic IP address via DNS/DHCP
Remote wakeup
Wake On LAN, Wake On Ring
Centralized
management
Monitoring and control of multiple servers
1
1
Industry standard
IPMI
2.0
2.0
1
The feature is not supported on VMware ESXi systems.
2
The standard serial port is not available for the feature.