User's Guide

Installing Windows Server 2008 R2 D-11
10. The folder reference dialog box appears.
Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK].
− If the Onboard RAID Controller (LSI Embedded MegaRAID
TM
) is used:
drive letter>:\017\win\winnt\oemfd\ws2008r2\fd1\megasr1
− If the N8103-129/130 RAID Controller is used:
<drive letter>:\017\win\winnt\oemfd\ws2008r2\fd1\megasas2
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 11.
− If the Onboard RAID Controller (LSI Embedded MegaRAID
TM
) is used:
[LSI Embedded MegaRAID]
− If the N8103-129/130 RAID Controller is used:
[LSI MegaRAID SAS 9264-8i]
11. Remove the NEC EXPRESSBUILDER DVD and set Backup DVD-ROM or Windows
Server 2008 R2 DVD-ROM.
12. Select the disk where a partition will be created, and then click [Drive options
(advanced)].
IMPORTANT: If the partition has already been created, go to step 15.
NOTE: The following message might be displayed when not replacing
it with OS installation media after driver's reading. Please replace with
OS installation media when it is displayed, and click "refresh".