User's Guide

9-72 Upgrading Your Server

3 2 1 3 2 1

When the jumper setting is changed, the internal hard disk drive is recognized by the BIOS setup

utility as a RAID system drive.

Select [Advanced] → [SATA Configuration] → [SATA Mode] and confirm that [RAID Mode] is

shown.

For details, see System BIOS (SETUP) (on page 4-2).

When these settings are changed, the LSI Software RAID Configuration Utility is used to build a

RAID system. For details, see RAID System Configuration (on page 4-37).

NOTE: When the Express Setup program provided on the included

EXPRESSBUILDER DVD is used, the RAID system is automatically

built. In addition, if the operating system to be installed is Windows, the

processing up until the operating system is installed can be performed

without interruption.

RAID configuration jumpe

settings

Front

Back

Motherboard

RAID

configuration

disabled

RAID

configuration

enabled