User's Guide

9-54 Upgrading Your Server
Installing RAID Controller
Take the following steps to install the optional RAID controller in the RAID Controller slot.
2.5-inch RAID controller
1.
See page 9-4 to prepare.
2. Pull out the server from the rack (as described on page 9-4).
3. Remove the top cover (as described on page 9-24).
4. Remove the screws holding the riser card in place.
5. Remove the riser card.
IMPORTANT: Carefully remove the riser card so as not to contact
any other components.
6. Remove the two screws from the bracket, and then remove the bracket.
Screws