User's Guide

Configuring Your Server 4-47
Menu Tree
+: Selection/execution parameter z: Setting parameter. •: Information display
>: Can be set (modified) after creation of virtual drive
Menu Description
+Configure Performs Configuration settings
+Easy Configuration Set configuration (Using fixed value)
+New Configuration Set new configuration
+View/Add Configuration Additional setting / viewing configuration
+Clear Configuration Clear configuration
+Select Boot Drive Chose Bootable Virtual Drive
+Initialize Initialize virtual drive
+Objects Various settings
+Adapter Set disk array controller
+Sel. Adapter Clear configuration
zRebuild Rate 30
zChk Const Rate 30
zFGI Rate 30
zBGI Rate 30
zDisk WC Off
zRead Ahead On
zBios State Enable
zCont on Error Yes
zFast Init Enable
zAuto Rebuild On
zAuto Resume Enable
zDisk Coercion 1GB
zFactory Default
+Virtual Drive Virtual drive operation
+Virtual Drives Select virtual drive (when multiple virtual drives exist)
+Initialize Initialize virtual drive
+Check Consistency Check virtual drive redundancy
+View/Update Parameters Display virtual drive information
• RAID Display RAID level
• SIZE Display virtual drive capacity
• Stripe SIZE Display stripe size
• #Stripes Display the number of hard disk drives in virtual drive
• State Display virtual drive status
• Spans
• Disk WC Off: Write through
On: Write back
• Read Ahead
+Physical Drive Physical drive operation
+Physical Drive Selection Menu Select physical drive
+Make HotSpare Set as hot-spare disk for auto rebuilding
+Force Online Make a disk online
+Force Offline Make a disk offline
+Drive Properties Display hard disk drive information
• Device Type Hard disk drive type
• Capacity Hard disk drive capacity
• Product ID Hard disk drive model
• Revision No. Hard disk drive revision
+Rebuild Perform rebuilding
+Check Consistency Perform virtual drive redundancy check