User's Guide

4-26 Configuring Your Server
The table below shows the operation when the AC power to the server is turned off once and then
back on, in accordance with the [AC LINK] setting.
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the
power.
IMPORTANT: To turn on the server from the UPS (Uninterruptible
Power Supply), select [Server] - [AC LINK] - [Power On].