User's Guide

4-24 Configuring Your Server
Server
When the cursor is moved to the [Server] position, the Server menu is displayed. If an item with an
arrow displayed to its left (all menus in this section) is selected and then the Enter key is pressed, a
submenu is displayed in which settings are specified.
This section describes the options that can be specified on the Server menu and their functions. If
[System Management], [BMC LAN Configuration], or [Event Log Configuration] is selected and
then the Enter key is pressed, a submenu is displayed in which settings are specified.
For details about the options, see the following table.
Option Parameters Description
System
Management
– –
BMC LAN
Configuration
– –
Event Log
Configuration
– –
Assert NMI on
PERR
Disabled
[Enabled]
Specify whether to support PCI PERR.
Assert NMI on
SERR
Disabled
[Enabled]
Specify whether to support PCI SERR.
FRB-2 Policy [Retry 3 Times]
Disable FRB2
Timer
Always Reset
Specify the system operation when an FRB level 2
error occurs.
Boot Monitoring [Disabled]
5 to 60 minutes
Specify whether to enable or disable the boot
monitoring function on booting, or select the timeout
time limit.
To use this function, install NEC ESMPRO Agent. Set
this item to [Disabled] if the system is booted from an
OS without NEC ESMPRO Agent installed.