User's Guide

4-22 Configuring Your Server
For details about the options, see the following table.
Security settings can be specified in the submenu that opens by selecting [Security Configuration]
and pressing Enter.
Option Parameter Description
Password
Configuration
– –
Administrator
Password
Up to 20 alphanumeric
characters
When the Enter key is pressed, the
administrator password entry screen is
displayed. This password can be used to
access all setup menus. This setting can
only be specified by logging in as an
administrator when starting up the setup
utility.
User Password
Up to 20 alphanumeric
characters
When the Enter key is pressed, the user
password entry screen is displayed. This
password can only be used to access
certain setup menus. This setting can only
be specified by logging in as an
administrator when starting up the setup
utility.
Security
Configuration
– –
Password On Boot [Disabled]
Enabled
Specify whether to enable or disable
password entry on boot. An administrator
password must be specified in advance. If
an administrator password is specified and
this option is set to [Disabled], BIOS is
judged to have been started up by a normal
user.
Disable USB Ports [Disabled]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear + Internal
Specify whether to enable or disable the
USB ports.
Trusted Computing
[ ]: Factory-set