User's Guide

4-20 Configuring Your Server
Option Parameters Description
BIOS Redirection Port [Disabled]
Serial Port A
Serial Port B
Specify whether to enable or disable
direct connections from the
management terminal using the
ESMPRO Manager or hyper terminal
from the serial port specified for this
menu item. If this menu item is enabled,
the following setting menu items are
displayed.
Terminal Type [VT100+]
VT-UTF8
ANSI
Select the terminal type.
Baud Rate 9600
19200
57600
[115200]
Specify the baud rate used for the
interface with the connected hardware
console.
Data Bits 7
[8]
Specify the data bit width.
Parity [None]
Even
Odd
Specify the parity bits.
Stop Bits [1]
2
Specify the stop bit setting.
Flow Control None
[Hardware
RTS/CTS]
Hardware
RTS/CTS+CD
Specify the flow control method.
Continue C.R. after POST Disabled
[Enabled]
Specify whether to enable or disable
the continued execution of console
redirection after the POST finishes.
[ ]: Factory-set