User's Guide

4-18 Configuring Your Server
USB Configuration submenu
When [USB Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
Main Advanced Security Server Boot
Serial Port A Settings
Serial Port A
Serial A Base I/O
Serial A Interrupt
Serial Port B Settings
Serial Port B
Serial B Base I/O
Serial B Interrupt
Console Redirection Settings
BIOS Redirection Port
Configures serial port A using
options.
[Disabled]
No configuration
[Enabled]
User configuration.
Save & Exit
[Enabled]
[3F8h]
[IRQ 4]
[Enabled]
[2F8h]
[IRQ 3]
[Disabled]
F1: General Help
F4: Save ESC: Exit
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 1.24.1115n Copyright (C) 2010 American Megatrends, Inc.
For details about the options, see the following table.
Option Parameters Description
USB 2.0 Support Disabled
[Enabled]
Specify whether to enable or
disable USB 2.0.
Device Reset Timeout 10 sec
[20 sec]
30 sec
40 sec
Specify the time to wait
when issuing a Start Unit
command to a USB mass
storage device until a
timeout occurs.
[ ]: Factory-set