User's Guide

4-14 Configuring Your Server
PCI Configuration submenu
When [PCI Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
For details about the options, see the following table.
Option Parameters Description
LAN Controller Disabled
[Enabled]
Specify whether to enable or disable the onboard LAN
Controller.
LAN1 Option ROM
Scan
Disabled
[PXE Boot]
iSCSI Boot
Specify the boot method for LAN1, which is onboard.
LAN2 Option ROM
Scan
Disabled
[PXE Boot]
iSCSI Boot
Specify the boot method for LAN2, which is onboard.
PCI Slot 0A Option
ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a RAID controller installed in a slot dedicated to RAID
controllers.
PCI Slot 1B
Option ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a PCI card connected to the full-height riser card.
PCI Slot 1C
Option ROM
Disabled
[Enabled]
Specify whether to enable or disable an option ROM for
a PCI card connected to the low-profile riser card.
[ ]: Factory-set
IMPORTANT: For a RAID controller, LAN card (network boot), or
Fibre Channel controller, if no hard disk drive on which an OS is
installed is connected, set the option ROM for that slot to [Disabled].