User's Guide

1. Installing Internal Optional Devices
Express5800/R110g-1E User’s Guide
52
Chapter 2 Preparations
When installing or removing the Internal Flash Memory, DIMMs, RAID controllers, PCI cards, or 5.
optical disk drives, dismount the server from the rack and place it on a flat and hard desk.
See Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack – (2) Removal
procedure).
If installing only additional hard disk drives, go to step 11.
Important
Do not leave the server open on the rack.
Remove the top cover.
6.
See Chapter 2 (1.6 Removing the Top Cover).
Depending on the components to be installed or removed, follow the procedure in order.
7.
See Chapter 2 (1.7 Internal Flash Memory to 1.13 Optical Disk Drive).
Connect cables.
8.
See Chapter 2 (1.10.1 Connecting cables).
Attach the top cover.
9.
See Chapter 2 (1.19 Attaching the Top Cover).
Mount the server onto the rack.
10.
See Chapter 2 (2.1.2 (1) Installation).
Install hard disk drives.
11.
See Chapter 2 (1.15 3.5-inch Hard Disk Drive or 1.16 2.5-inch Hard Disk Drive).
Attach the front bezel.
12.
See Chapter 2 (1.20 Attaching the Front Bezel).
Continue the setup with reference to Chapter 2 (2.2 Connection).