User's Guide

4. Names and Functions of Parts
Express5800/R110g-1E User’s Guide
47
Chapter 1 General Description
4.7.8
LEDs for LAN connectors
The three LAN connectors provided at the rear of the server have two LEDs each.
 LINK/ACT LED
This LED indicates the state of the LAN port.
The following table lists LINK/ACT LED patterns.
LINK/ACT LED pattern Description
On (green) The server is connected with network correctly.
Flashing (green) The server is accessing network.
Off The server is disconnected from network.
 SPEED LED
This LED indicates which network interface is used.
 Two onboard LANs ( 1, 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
 Management LAN ( M) supports 100BASE-TX, and 10BASE-T.
The following table lists LINK/ACT LED patterns.
SPEED LED pattern Description
On (amber) The port is operating with 1000BASE-T interface.
On (green) The port is operating with 100BASE-TX interface.
Off The port is operating with 10BASE-T interface.
LINK/ACT
LED
SPEED
LED
Management
LAN connector
LAN ports
SPEED
LED
LINK/ACT
LED
M
1
2