User's Guide

4. Names and Functions of Parts
Express5800/R110g-1E User’s Guide
45
Chapter 1 General Description
STATUS LED pattern Description Solution
On (amber) A temperature alarm was detected.
Check the internal fan for dusts. Also check if
the fan unit is properly connected.
If the LED indication does not change when the
fans are normal, contact your sales
representative.
A voltage alarm was detected. Contact your sales representative.
A CPU temperature alarm was detected.
A CPU error was detected.
Turn the power off and then turn it on. If the
POST screen displays any error message, take
notes of the message, and contact your sales
representative.
SMI timeout was detected Contact your sales representative.
Sensor error was detected.
Flashing (amber)
Failure of the power supply unit was
detected
Contact your sales representative.
A fan alarm was detected.
Check if the internal cooling fan cable is
properly connected.
A temperature warning was detected.
Check the internal cooling fan for dusts. Also
check if the fan unit is properly connected.
A voltage warning was detected Contact your sales representative.
An error was detected on either of the
hard disk drives when the RAID system is
configured.
4.7.3
LINK/ACT LED ( 1, 2)
LINK/ACT LED at the front of the server lights green when it is connecting to LAN and flashes when
transmitting or receiving data on LAN. The number next to the icon indicates a LAN port number.
4.7.4
Disk Access LED ( )
DISK Access LED indicates the status of HDDs.
The following table lists DISK Access LED patterns.
DISK Access LED pattern Description
On (green)/Flashing green Hard disk drive or optical disk drive is being accessed.
On (amber) Hard disk drive is failing.
Off Hard disk drive is halted.
4.7.5
Optical Disk Access LED
The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.