Manualshelf

User's Guide

ManualsBrandsNEC ManualsserversNEC Express5800/R110g-1E
131132133134135136137138139140
3. EXPRESSSCOPE ENGINE 3
Express5800/R110g-1E User’s Guide
131
Chapter 3 Setup
In the DHCP of the Property screen, specify Enable or configure IP Address/Subnet Mask.
5.
Tips
If Shared BMC LAN is enabled, Web feature, remote media/KVM feature, or
command line interface feature may be interrupted. In this case, wait for a while,
and connect with network again.
Connect the LAN cable to the management LAN connector in order to connect to the network.
6.
Access EXPRESSSCOPE Engine 3 by using a web browser from "PC for Management" with the settings
specified by step 5.