User's Guide

2. Installation and Connection
Express5800/R110g-1E User’s Guide
119
Chapter 2 Preparations
Connecting to a uninterruptible power supply (UPS)
2.2.1
To connect to the uninterruptible power supply (UPS), use the connector output on the rear of the UPS. For
details, refer to the manual supplied with the UPS.
To change the settings for linking the power supply of UPS, select Server and then AC-LINK in the BIOS
setup utility, and change the displayed parameters. Select Power On to perform automatic operations by
using the UPS. For details, see Chapter 2 (1.2.4 Server) in "Maintenance Guide".
Option slot
Overload protection
reset button
Connector outputs
Input connecto
r
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connecto
r
Example
Computer interface port (UPS)