Reference Guide

79
2.6 Environment Setting Commands
2.6.1 setOption
Syntax:
dscli setOption OptionName Value
Description:
Sets an option of the NEC ESMPRO Manager.
Options:
OptionName
Specify a name of the NEC ESMPRO Manager option. See the list below.
Value
Specify new value to be set. See the list below.
OptionName Contents Value Default
BMC_RETRY_COUNT
Specify Retry count for
communicating to BMC on a
managed component.
0-10 5
BMC_TIMEOUT
Communication Timeout (in seconds)
to BMC on a managed component.
1-15 5
BMC_SOURCE_PORT
Specify a UDP port number for
communicating to BMC on a
managed component.
1025-65535 47117
CUI_NO_RESPONSE_TI
MEOUT
Specify times (in seconds) until the
remote console is disconnected due
to a communication timeout.
20-1800 60
CUI_SYS_RQ_KEY
Specify alias for SysRq key on CUI
remote console.
"": Not specified
"Q": Ctrl+Alt+Q
"X": Ctrl+Alt+X
“”
HISTORY_LOG_NUMBER
_OF_RECORDS
Specify maximum number of
application logs.
2000-10000 2000
MODEM_PORT_NUMBER
Specify a serial port on NEC
ESMPRO Manager component.
The serial port is used for
communicating to the managed
component via modem or with direct
connection.
1-8 1
MONITORING_ENABLE
Determine whether to enable/disable
the component monitoring function
that monitors the power status and
the STATUS lamp on each managed
component.
0: Disabled
1: Enabled
1
MONITORING_AUTO_UP
DATE_INTERVAL
Specify interval times (in seconds) to
update automatically the displays of
component status.
1-60 5
RC_POWER_CONTROL_I
NTERVAL_MILLIS
Specify interval times (in
milliseconds) at which power control
is performed continuously for multiple
components.
0-5000 500
RMI_PORT Specify a TCP port number for RMI. 1024 - 65535 1099