Reference Guide

51
2.2.27 getSensorLevel
Syntax:
dscli getSensorLevel Component Type
Description:
Obtains separate setting at the alert level of BMC configuration information of a specified managed
component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Type
Specify an alert type.
SNMP: SNMP alert
MAIL: MAIL alert
Output:
Displays alert level of BMC configuration information. See 2.2.26 setSensorLevel for details.
The following shows an example.
TEMP_THRESHOLD=111
VOLT_THRESHOLD=000
FAN_SENSOR=000
PLATFORM_SEC=800
PROCESSOR=000
PW_SUPPLY=000
PW_UNIT_STS=000
MEM=000
DRIVE_SLOT=000
EVT_LOG_DISABLED=800
SYS_EVT=080
CRITICAL_INT=000
BUTTON_SWITCH=880
MODULE_BOARD=800
SYS_BOOT_RESTART_INIT=880
BOOT_ERR=880
ACPI=880
SMI_TIMEOUT=800
POST_MEM_RESIZE=800
POST_ERR=800
SLOT_CONNECTOR=080
WATCHDOG_TIMER=080
SENSOR_FAILTURE=800
: