Installation Guide

♦
22
install NEC ESMPRO Manager Update
Note
If NEC ESMPRO Manager Ver. 5.0 or later has already been installed, you can update it to this version.
1. Save NEC ESMPRO Manager installer into any directory, and uncompress it.
2. Move to the directory containing the NEC ESMPRO Manager installer.
The following is an example of installation into /usr/local/bin:
cd /usr/local/bin
3. Start the NEC ESMPRO Manager installer.
The NEC ESMPRO Manager will be installed under /opt/nec/es_manager.
sh esmpro.sh
4. A message to confirm whether you continue the installation is displayed.
e http connector port.
tallation is completed, the following message is displayed:
No
Input "add" and "Enter" key.Input of th
5.
The installation completes.
When the ins
"Inst allation of NEC ESMPRO Manager is now completed."
te
If NEC ESMPRO Manager on the web browser may display incorrectly after you install it, see the procedure
“Installation” in “chapter 4 1.1 NEC ESMPRO Manager”.