Installation Guide

3. Setting Up Windows Server 2012 R2

Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)

Chapter 1 Installing Windows

11. The setup process starts.

Click Start to continue setup.

If you need to suspend setup due to reasons such as backing up data, restart the setup process from the

beginning.

12. Continue setup according to the on-screen messages.

When the following screen appears, insert the OS installation media into the disk drive, and then click OK.

13. The server reboots automatically.

If you use Internal Flash Memory, press <F3> key when the following message appears during POST.

Press <F2> Setup, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network

Note

Since the OS installation media is set in the optical disk drive in Step 12, boot the

system from the optical disk drive having higher boot priority, not from Internal

Flash Memory.