Installation Guide

8. Windows OS Parameter File
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
323
Chapter 1 Installing Windows
(3) Click on the right side of the screen.
(4) Check the settings, and then click Save.
Save the file according to the on-screen instructions.
 Go to step 10.
Use Custom:
(1) Click Custom.
(2) Use this menu to configure the RAID system with the RAID controller detected automatically.
Note
When using an onboard RAID controller (LSI Embedded MegaRAID):
This function does not support the creation of RAID10 by using the onboard RAID
controller. Refer to Chapter 2 (4. RAID System Configuration) in “Maintenance
Guide” when creating RAID10.