Installation Guide

6. Setting Up Windows Server 2008
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
270
Chapter 1 Installing Windows
If using the onboard RAID Controller (LSI Embedded MegaRAID) and a USB-DVD drive
[LSI Embedded MegaRAID]
Tips
When N8103-168 is used, the name of the RAID Controller that appears on the
screen differs from the one shown on WebBIOS and Universal RAID Utility.
However, this is not a problem.
26. If you used EXPRESSBUILDER DVD, remove it and then insert the OS installation media.
27. Select the disk in which the partition will be created, and then click Drive options (advanced)
If a partition has already been created, go to step 30.
28. Click New, enter the partition size into the size input box, and then click Apply.
Note
When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition size can
only be set to 2,097,152 MB or less.
29. Select the partition created in step 28, and then click Format.
30. In the window below, select the created partition, and then click Next.
When the following message appears, Windows installation starts automatically.
Tips
At this time, if EXPRESSBUILDER DVD is still in the optical disk drive, the
message prompting you to replace it with an OS installation media appears.
Remove EXPRESSBUILDER DVD and then insert the OS installation media.
Install Windows – Insert Disc
Please insert Windows installation disc 1.
OK Cancel