Installation Guide

6. Setting Up Windows Server 2008
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
269
Chapter 1 Installing Windows
23. "Where do you want to install Windows?" window appears.
Note
If the driver was loaded in steps 17 and 18, or if a RAID Controller is not used, go to
step 27.
Click Load Driver.
If the following message appears, replace the OS installation media and EXPRESSBUILDER DVD in
the optical disk drive, and then click Browse.
Load Driver
To install the driver needed to access your
h
ard drive, insert
the installation media containing the driver files
,
and then
click OK.
Note: The installation media can be a floppy disk, CD, DVD, or
USB flash drive.
Browse OK Cancel
Tips
 If using Internal Flash Memory, you do not need to remove the OS installation
media.
 At this time, the message "The Installation media can be a floppy disk, CD,
DVD, or USB flash drive." appears on the screen, use the supplied
EXPRESSBUILDER DVD or Internal Flash Memory.
24. Specify one of the following locations, and then click OK.
(When using EXPRESSBUILDER, select the optical disk drive. When using Internal Flash Memory,
select the volume of INTER-FLASH.)
When using the N8103-172/173/174 RAID Controller:
\006\win\winnt\oemfd\ws2008\megasas2
When using the N8103-168 RAID Controller:
\006\win\winnt\oemfd\ws2008\megasas2
When using the N8103-171 RAID Controller:
\006\win\winnt\oemfd\ws2008\megasas2
When using the onboard RAID Controller (LSI Embedded MegaRAID) and a USB-DVD drive:
\006\win\winnt\oemfd\ws2008\megasr1
Tips
The driver does not have to be loaded at this time if it was loaded in steps 17 and
18.
25. Select the necessary driver from the driver list shown, and then click Next.
N8103-172/173/174 RAID Controller:
[LSI MegaRAID SAS 9272-8i]
N8103-168 RAID Controller:
[LSI MegaRAID SAS 9265CV-8i]
N8103-171 RAID Controller:
[LSI MegaRAID SAS 9240-8i]