Installation Guide

5. Setting Up Windows Server 2008 R2
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
221
Chapter 1 Installing Windows
5. Click Yes to the message.
6. Confirm that the TEAM: "Team name" adapter does not exist in the Network adapters tree, and then
restart the system.
Graphics accelerator driver
5.5.5
The graphics accelerator driver for standard configurations is installed when Starter Pack is installed from
EXPRESSBUILDER.
Tips
The graphics accelerator driver is only enabled in Full installations. Standard VGA
is used in the case of Server Core installation.
To reinstall drivers separately, complete the following steps.
1. Insert EXPRESSBUILDER DVD into the optical disk drive.
If Autorun Menu appears, close the menu.
Tips
You do not have to insert EXPRESSBUILDER DVD if Starter Pack was installed
from Internal Flash Memory.
2. Double-click the install.bat icon in the following folder.
When using EXPRESSBUILDER DVD:
EXPRESSBUILDER DVD:\006\win\winnt\ws2008r2\video
If Starter Pack was installed from Internal Flash Memory:
System drive:\StartPKG\ws2008r2\video
You will be prompted to confirm the End User License Agreement during this process.
Click the ACCEPT button to continue.
3. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.
Graphic accelerator driver installation is now complete.
When using a SAS controller (N8103-142)
5.5.6
The driver for SAS controller N8103-142 is automatically installed by Windows Plug-and-Play.
When using a RAID Controller (N8103-161)
5.5.7
The driver for RAID Controller N8103-161 is automatically installed by Windows Plug-and-Play.
When using a Fibre Channel controller (N8190-153/154/157/158)
5.5.8
The driver for Fibre Channel controller N8190-153/154/157/158 is automatically installed by Windows
Plug-and-Play. If you connect Fibre Channel controller N8190-153/154/157/158 after installing OS, install
Starter Pack again.