Installation Guide

5. Setting Up Windows Server 2008 R2
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
191
Chapter 1 Installing Windows
22. “Where do you want to install Windows?” window appears.
Note
If the driver was loaded in steps 17 and 18, or if a RAID Controller is not used, go to
step 26.
Click Load Driver.
If the following message appears, replace the OS installation media and EXPRESSBUILDER DVD in the
optical disk drive, and then click Browse.
Load Driver
To install the driver needed to access your
h
ard drive, insert
the installation media containing the driver files
,
and then
click OK.
Note: The installation media can be a floppy disk, CD, DVD, or
USB flash drive.
Browse OK Cancel
Tips
 If using Internal Flash Memory, you do not need to remove the OS installation
media.
 At this time, the message “The Installation media can be a floppy disk, CD,
DVD, or USB flash drive.” appears on the screen, use the supplied
EXPRESSBUILDER DVD or Internal Flash Memory.