Installation Guide

4. Setting Up Windows Server 2012
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
142
Chapter 1 Installing Windows
2. Open Command Prompt, and execute install.bat in the following folder.
When using EXPRESSBUILDER DVD:
EXPRESSBUILDER DVD:\006\win\winnt\ws2012\lan\intel
If Starter Pack was installed from Internal Flash Memory:
System Drive:\StartPKG\ws2012\lan\intel
3. When the following message appears, remove the EXPRESSBUILDER DVD from the optical disk drive,
and then restart the system.
Note
Using an optional LAN board, perform procedure "4.5.2 Setting up LAN drivers" for
each optional LAN board.
(3) Network adapter name
After installing the LAN drivers, the following network adapter names will be displayed by the Device Manager.
Network adapters for the standard configuration
Broadcom NetXtreme Gigabit Ethernet #xx*
If connecting with an optional LAN board:
[N8104-128] Broadcom BCM57711 NetXtreme II 10 GigE (NDIS VBD Client) #xx*
[N8104-132/133/138] Broadcom NetXtreme Gigabit Ethernet #xx*
[N8104-145] Intel(R) Ethernet Server Adapter I340-T2 #xx*
* If there are adapters with the same name, a different identification number will be assigned to xx.
Tips
The ID for N8104-128 might be a number of two or more digits. This is due to the
LAN driver specifications and not an error. This number cannot be changed.
Installation Completed