Installation Guide

4. Setting Up Windows Server 2012
Express5800/T110g-S, R110g-1E, T110g-E Installation Guide (Windows)
125
Chapter 1 Installing Windows
16. Click Install now.
Windows setup starts.
- If the following message appears, go to step 17.
- If it does not, go to step 19.
Tips
 The above message appears if you are using an onboard RAID controller (LSI
Embedded MegaRAID) in an environment equipped with an internal DVD drive.
 When this message appears, the message will say “CD, DVD, or USB flash
drive”, but use Internal Flash Memory or removable media with the OEM
drivers copied onto it.
17. Select the destination, and then click OK.
If using OEM drivers (made at step 12)
Removable media:\OEM_driver\ws2012\megasr1
If using Internal Flash Memory
Internal Flash Memory:\006\win\winnt\oemfd\ws2012\megasr1
Tips
The volume label of Internal Flash Memory is INTER-FLASH.
18. Select LSI Embedded MegaRAID, and then click Next.