User Guide

Step 4 In step 2/3, specify the number of Physical

Devices used by Logical Drives (or the number of

Physical Devices used for data storage) and the number

of Logical Drives created in the RAID Controller. If

Physical Devices of different interface types or device

type exist, specify the number of Physical Devices in

each type. After the specification, click [Next].

Step 5 Step 3/3 shows the configuration of the

RAID System to be configured by the Easy

Configuration. To the RAID System according to the

displayed information, click [OK]. To change the

configuration, click [Back].

Step 6 If you click [OK] in step 3/3, then the

RAID System will be configured. After the Logical

Drives are created and the makings of Hot Spares are

successfully completed, [Completing the "Easy

Configuration" Wizard] appears. Now creating the

Logical Drives and making Hot Spares is completed.

After the wizard is closed, see the Tree View to check

the configuration. However, the Initialize of the Logical

Drives having been created may not be completed. The

progress and result of initializing the Logical Drives

can be checked on the Operation View