User Guide

20
- Setting reporting measures:
Reporting measures are required for reporting and are measures other than the destinations. This
section discusses the structure of each reporting measure. Some reporting measures require
setting of functions other than AlertManager functions. Manager report (SNMP) requires a
structure of SNMP service of Windows and manager report (TCP/IP Out-of-Band) requires
Remote Access Service structure of Windows. In these cases also, the system indicates on the
screen that other settings are required.
Bitmap
Reporting measures
Manager (SNMP) (*1)
Manager (TCP/IP In-Band) (*1)
Manager (TCP/IP Out-of-Band) (*1)
Internet Mail (*2)
Pop-up Message (*2)
Print (*2)
Write File (*2)
Run Command (*2)
Report to Client (*1)
Critical error log (*1)
*This measures is not indicated in setting dialog.
*1 Set in Agent only.
*2 Set in both Agent and Manager.
Tips
To report Alert, make settings by clicking the function status bitmap and change to
green.
- Setting report reception measures:
The setting of a report reception indicates the preparations required for the manager to receive a
report. Here, it refers to a structure of each reporting measure such as "setting a mode used for
receiving manager reports."
Bitmap
report reception measures
Receive from Agent (*1)
*1 Set in Manager only.
Tips
To receive the alert, make settings by clicking the function status bitmap and
change to green.