Installation Guide Express5800 Series NEC ExpressUpdate Agent Chapter 1 Summary Chapter 2 System Requirements Chapter 3 Installation Chapter 4 Precautions for Use Rev.3.
NEC ExpressUpdate Agent Installation Guide Contents Contents............................................................................................................................................................. 2 Trademarks ........................................................................................................................................................ 3 External Libraries which this product uses...................................................................................
NEC ExpressUpdate Agent Installation Guide Trademarks NEC ExpressUpdate, EXPRESSBUILDER, NEC ESMPRO are trademarks of NEC Corporation. Microsoft, Windows, Windows Vista, Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Linux is registered trademarks or trademarks of Linus Torvalds in the United States and other countries. Red Hat is registered trademarks of Red Hat, Inc. and its subsidiaries in the United States and other countries.
NEC ExpressUpdate Agent Installation Guide External Libraries which this product uses This product contains libraries ("External Libraries") provided by the third party suppliers ("Suppliers"). Please assume and agree these libraries' license documents and NOTICE files before using this product. License documents and NOTICE files of "External Libraries" are stored in the following folders.
NEC ExpressUpdate Agent Installation Guide About This Document This document explains the procedures of "NEC ExpressUpdate Agent" installation. Before attempting to operate the NEC ExpressUpdate Agent, read this document so as to gain an adequate understanding of the contents. Notes This document is intended for persons who are familiar with the operating system's functions and operations and the network's functions and setup.
NEC ExpressUpdate Agent Installation Guide Chapter1 Summary NEC ExpressUpdate Agent is software that works on the server managed by NEC ESMPRO Manager (Ver5.23 or later). It can remotely update software or firmware on the server from NEC ESMPRO Manager (Ver5.23 or later) operations.
NEC ExpressUpdate Agent Installation Guide Chapter2 System Requirements Install NEC ExpressUpdate Agent on managed server. The environment to operate NEC ExpressUpdate Agent is following. Hardware It is necessary that the server is managed by NEC ESMPRO Manager (Ver5.23 or later) and satisfies the following conditions.
NEC ExpressUpdate Agent Installation Guide IMPORTANT: You can not install NEC ExpressUpdate Agent in the following case. -- Installation on guest OS virtual machine such as Hyper-V. In the Server Core, if Wow6432Node is uninstalled, NEC ExpressUpdate Agent will not be installed normally. Please do not uninstall Wow6432Node, if you install NEC ExpressUpdate Agent. The following packages are necessary to use NEC ExpressUpdate Agent on Red Hat Enterprise Linux Server 6(x64) or Oracle Linux 6(x64).
NEC ExpressUpdate Agent Installation Guide Chapter3 3.1 Installation NEC ExpressUpdate Agent Installation for Windows Explain the installation of NEC ExpressUpdate Agent. 3.1.1 Check before installation Check the followings: -- See chapter 2 to check the system requirement. -- Login to Windows as Administrator. 3.1.2 Start installer If you install NEC ExpressUpdate Agent by using downloaded modules: After unzipping the downloaded modules, please execute the following file.
NEC ExpressUpdate Agent Installation Guide 3.1.3 Install NEC ExpressUpdate Agent (1) NEC ExpressUpdate Agent installer will be started. Click [Next]. (2) Carefully read the terms of the license agreement for NEC ExpressUpdate Agent, and select [I accept the terms of the license agreement], click [Next].
NEC ExpressUpdate Agent Installation Guide (3) Carefully read the terms of the license agreement for update packages, and select [I accept the terms of the license agreement], click [Next]. (4) Input the directory to install, click [Next]. CHECK: If Universal RAID Utility for Windows Ver2.1 or later has already been installed, the above menu is not displayed. So you cannot select the directory to install.
NEC ExpressUpdate Agent Installation Guide (5) Read the information, and click [Next]. The installation will be started. IMPORTANT: If the menu which requires rebooting is displayed, please reboot the operating system. TIPS: After installation of NEC ExpressUpdate Agent, you can check whether the installation is completed normally. Click [Administrative Tools] - [Services].
NEC ExpressUpdate Agent Installation Guide 3.2 NEC ExpressUpdate Agent Uninstallation for Windows Explain the uninstallation of NEC ExpressUpdate Agent. 3.2.1 Check before uninstallation Check the following: -- Login to Windows as Administrator. 3.2.2 Uninstall NEC ExpressUpdate Agent Uninstall from the Windows menu [Control Panel] - [Add or Remove Programs]. Select [NEC ExpressUpdate Agent] and click [Change/Remove] button. You can uninstall it by displayed direction.
NEC ExpressUpdate Agent Installation Guide 3.3 NEC ExpressUpdate Agent Installation for Linux Explain the installation of NEC ExpressUpdate Agent 3.3.1 Check before installation Check the followings: -- See chapter 2 to check the system requirement. -- Login to Linux as root user. CHECK: NEC ExpressUpdate Agent installer exists on following directory: -- If you install by using downloaded modules: /eu_agent.
NEC ExpressUpdate Agent Installation Guide 3.3.3 Install NEC ExpressUpdate Agent (1) Move to the directory that the installer was extracted. cd /usr/local/bin/ExpressUpdate/eu_agent/ExpressUpdateAgent-N.NN-x "N.NN" in the example file name means the version. (2) Execute the shell for installation. ./ExpressUpdateAgent-N.NN.sh "N.NN" in the example file name means the version. (3) A message to confirm whether to install NEC ExpressUpdate Agent is displayed. Input "yes" and "Enter" key.
NEC ExpressUpdate Agent Installation Guide 3.4 NEC ExpressUpdate Agent Uninstallation for Linux Explain the uninstallation of NEC ExpressUpdate Agent 3.4.1 Check before installation Check the following: -- Login to Linux as root user. 3.4.2 Uninstall NEC ExpressUpdate Agent (1) Move to the directory in which the files for installation are extracted. cd /usr/local/bin/ExpressUpdate/eu_agent/ExpressUpdateAgent-N.NN-x "N.NN" in the example file name means the version.
NEC ExpressUpdate Agent Installation Guide Chapter4 4.1 Precautions for Use NEC ExpressUpdate Agent Installation -- NEC ExpressUpdate Agent installer (Windows and Linux) cannot downgrade to the older version. If you want to use the older version, uninstall the current version and then install older version. Note: All the registered information will be deleted as the result of uninstalling.
NEC ExpressUpdate Agent Installation Guide 4.2 The change of the IP address of Operating System -- If the IP address of operating system on the managed server is changed, NEC ExpressUpdate Agent restarts automatically to recognize changed IP address and update the latest status. -- The number of IP address that can be set on the managed server is up to 42. If you set the IP address of 43 or more, you can not communicate with this software and NEC ESMPRO Manager. 4.
NEC ExpressUpdate Agent Installation Guide 4.6 Windows Data Execution Prevention (DEP) function You may receive an error message that is similar to the following during NEC ExpressUpdate Agent processing because of Windows Data Execution Prevention (DEP). Data Execution Prevention – Microsoft Windows To help protect your computer, Windows has closed this program. Name: axis2_http_server Data Execution Prevention helps protect against damage from viruses or other threats.
NEC ExpressUpdate Agent Installation Guide (3) Select "Turn on DEP for all programs and services except those I select:" in "Data Execution Prevention" tab of Performance Options, and click "Add" button. (4) From the opened dialog, move to the directory in which NEC ExpressUpdate Agent is installed, and select "EUAgent.exe", click "Open" button. Operate same way to "eciServiceProgram" and "axis2_http_server".
NEC ExpressUpdate Agent Installation Guide (5) Confirm the screen like following, and click "OK" button. (6) If the reboot of operating system is required, please reboot operating system. 4.7 Without Windows Print Spooler service NEC ExpressUpdate Agent Ver.3.10 or earlier, if Print Spooler service is stopped, eciService service will also be stopped. If you do not use Print Spooler service, please restart eciService service as follows. NEC ExpressUpdate Agent Ver.3.
NEC ExpressUpdate Agent Installation Guide Revision History 2.11 2.12 2009/11/26 2010/02/17 2.20 2.21 2.30 2.31 3.00 2010/02/23 2010/04/02 2010/07/21 2010/08/26 2011/04/13 3.01 2011/04/27 3.02 2011/06/24 3.03 3.04 2012/02/27 2012/05/25 3.05 2012/09/14 3.06 2012/11/21 3.07 2013/12/20 3.08 2014/01/07 3.09 2014/08/19 Initial edition Adds External Libraries. Corrects Operating System of System Requirements. Modifies NEC ExpressUpdate Agent Installation for Windows. Modifies copyright.
NEC ExpressUpdate Agent Installation Guide NEC ExpressUpdate Agent Installation Guide © NEC Corporation 2009-2014 23
