User Guide

- 35-
6. Command Line Interface
OVERVIEW
With the BMC Command Line Interface, you can control the host system from a remote SSH
client. The BMC supports SSH (Version 2) protocol.
CONNECTING TO BMC
Access the BMC IP address or DNS host name from SSH client on the remote management
PC.
To use Command Line Interface, you need to change the
configuration of the command line interface (SSH) to be enabled by
any of the setting of the Off-line Server Configuration Utility or
On-line Server Configuration Utility or Setting of Web browser. Refer
to the “
Management LAN Settings” in the “Chapter 2: Configuring the
Host System”.
You can change the BMC’s SSH port number by using the Off-line
Server Configuration Utility, On-line Server Configuration Utility or a
web browser. The default settings are as follows:
SSH: 22
A security warning messages regarding your server certificate may
be displayed when you access the BMC from a SSH client.