User Guide

- 25-
VI. Users
Display the user information that is using the Remote KVM/Media. Up to 2 users can
use Remote KVM/Media simultaneously.
VII. View
Control the visibility of tool bar (control box area and hot key area). The ‘Request Full
Control’ menu will be displayed for the Remote KVM/Media that is launched as view
only mode and it is possible to request for permission to the Remote KVM/Media that
is launched as full control mode.
VIII. Info
Display the version information.
The host system detects remote media as following devices: Remote
devices are disabled just after the remote KVM/Media is started. It is
displayed only when they are enabled from the “Media” menu.
• AMI Remote FD
• AMI Remote CD/DVD
•
AMI Remote USB Mem
The access lamp comes to remain lighting after it connects it
according to the kind of the floppy disk drive of management PC.
Notice
When the operation into which the resolution on the host system side
frequently changes after remote KVM is started, the remote KVM
connection might be disconnect. In that case, please start remote
KVM again.
Notice
When you log on to the BMC from the host system, do not access the
Remote KVM Console from a Web browser in the host system. You
will not be able to use keyboard and mouse.
Notice
On some browsers, if you want to start the Remote KVM/Media, you
may see the dialog ‘jviewer.jnlp couldn’t be downloaded’. In this case,
please download again by pressing ‘Retry’.
Notice
If the mouse pointer is not displayed properly on Remote KVM/Media,
please try the following setting on the host system OS.
- Lowered one scale from "Full" to "None" side on the [Hardware
acceleration]-[Troubleshoot]-[Advanced settings]-[Screen
Resolution]-[Display] of Control Panel.
- Uncheck the box for [Enhance pointer precision]-[Motion]-[Pointer
Options]-[Mouse Properties] of Control Panel. Also, try to check the
box for [Display pointer trails]-[Visibility].