Reference Guide

84
2.7.4 setUserProperty
Syntax:
dscli setUserProperty UserName PropertyName Value
Description:
Sets a property of a specified user.
Options:
UserName
Specify a user name.
PropertyName
Specify a property name. See the list below.
It is valid for “Operator” level user to change the executable authority.
OK : Enable to change, NG : Disable to change
Value
Specify new value to be set. See the list below.
PropertyName Contents Value Default
Admini-
strator
Ope-
rator
USER_NAME
Specify the user name Up to 16
characters.
(Blank) OK OK
USER_PASSWORD
Specify the login password. 6-16
characters.
(Blank) OK OK
USER_COMMENT
Specify the comment about the user. Up to 100
characters.
(Blank) OK OK
UL_POWER_ON
Specify the enable/disable of Power
ON.
0: Disabled
1: Enabled
0 NG OK
UL_POWER_OFF
Specify the enable/disable of Power
OFF function.
0: Disabled
1: Enabled
0 NG OK
UL_RESET
Specify the enable/disable of Reset
function.
0: Disabled
1: Enabled
0 NG OK
UL_POWER_CYCLE
Specify the enable/disable of Power
Cycle function.
0: Disabled
1: Enabled
0 NG OK
UL_SHUTDOWN
Specify the enable/disable of
Shutdown OS function.
0: Disabled
1: Enabled
0 NG OK
UL_DUMP
Specify the enable/disable of DUMP
switch function.
0: Disabled
1: Enabled
0 NG OK
UL_SEL_CLEAR
Specify the enable/disable of Clear
System Event Log function.
0: Disabled
1: Enabled
0 NG OK
UL_BMC_REMOTE
Specify the enable/disable of Change
BMC Configuration function.
0: Disabled
1: Enabled
0 NG OK
UL_CONFIG_CREATE
Specify the enable/disable of Add
Component function.
0: Disabled
1: Enabled
0 NG OK
UL_CONFIG_CHANGE_
DELETE
Specify the enable/disable of Set
Component Property function and
Delete Component function.
0: Disabled
1: Enabled
0 NG OK
UL_REMOTE_CONSOLE
Specify the enable/disable of Remote
Console function.
0: Disabled
1: Enabled
0 NG OK
UL_SCHEDULE
Specify the enable/disable of Set
Schedule function.
0: Disabled
1: Enabled
0 NG OK