Reference Guide

64
2.2.47 setBmcIpSync
Syntax:
dscli setBmcIpSync Component Value
Description:
Changes BMC IP Address Synchronization of NEC ESMPRO Agent Extension on a managed component.
BMC IP Address Synchronization means the function that the NEC ESMPRO Agent Extension corrects the
IP address in the BMC configuration information periodically to the IP address set on the operating system if
the managed component contains the BMC that use standard LAN port.
This command can be used via LAN when NEC ESMPRO Agent Extension service is running on the
managed component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Value
Specify a new value to be set.
0 Disable
1 Enable
TIP:
 If this command is sent to NEC ESMPRO Agent Extension on the managed component
that contains the BMC that uses an exclusive LAN port (Management LAN Port), the
command end successfully, but nothing is set.
2.2.48 getBmcIpSync
Syntax:
dscli getBmcIpSync Component
Description:
Obtains BMC IP Address Synchronization of NEC ESMPRO Agent Extension on a managed component.
BMC IP Address Synchronization means the function that the NEC ESMPRO Agent Extension corrects the
IP address in the BMC configuration information periodically to the IP address set on the operating system if
the managed component contains the BMC that use standard LAN port.
This command can be used via LAN when NEC ESMPRO Agent Extension service is running on the
managed component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Output:
Displays BMC IP Address Synchronization. The following shows an example.
Agent Config (BMC IP Sync) : Enable