Reference Guide

58
2.2.37 reset
Syntax:
dscli reset Component [/p]
Description:
Forcibly resets a specified managed component.
IMPORTANT:
 Since remote power control using NEC ESMPRO Manager is provided by hardware
regardless of the condition of operating system on the managed component, the system may
be damaged. Be careful when you perform remote power control. Reconfirm the status of
the managed component before power controls.
 In case that the managed component does not support a force network-boot function which
boots the component from network regardless of boot order, a force network-boot function
cannot be executed. See “NEC ESMPRO Manager Managed Components Summary”
whether the managed component supports function.
 In the case of PowerBay, The power control is not performed to the powerbay. It is
performed to the maintenance card integrated on the PowerBay.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
/p
Force boot from network after reset.