Installation Guide

3. Setting Up Windows Server 2012

Express5800/T110f-S, R110f-1E Installation Guide (Windows)

Chapter 1 Installing Windows

3.3.2

Requirements for Setup

Prepare the following media and instruction manuals before starting setup.

 Either of the following OS installation media

• NEC operating system installation media (hereafter referred to as Backup DVD-ROM)

• Microsoft operating system installation media (hereafter referred to as Windows Server 2012

DVD-ROM)

 Either of the following EXPRESSBUILDER

• EXPRESSBUILDER DVD

• Internal Flash Memory (optional)

 Prepare if needed:

− Removable media for Windows OS

parameter file

− Removable media for creating OEM drivers (Windows Server 2012)

Note

OEM driver is required when using the onboard RAID controller (LSI Embedded

MegaRAID) on the server equipped with internal optical disk drive.

Tips

• EXPRESSBUILDER may be distributed in Internal Flash Memory.

EXPRESSBUILDER can be run from Internal Flash Memory if it is installed in

the server.

• If you are using a server with Internal Flash Memory installed, you can install the

OS without using the EXPRESSBUILDER DVD.

• OEM drivers are required in the following cases. Prepare other removable

media should these conditions apply.

Is the built-in optical disk drive used for installation in an onboard RAID

Controller (LSI Embedded MegaRAID) environment?

Yes

Does the server have Internal Flash Memory?

The OEM drivers must be

created.

The OEM drivers do not

need to be created.

Yes